HobbyPCB.com

Built by Hobbyist for Hobbyist!
It is currently Sat Aug 24, 2019 9:49 am

All times are UTC - 5 hours




Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Fri Aug 17, 2018 6:30 am 
Offline

Joined: Thu Oct 26, 2017 1:23 am
Posts: 8
Hello to everybody,
after some months I connected my HSDR transceiver expecting everything going well like before.
Instead, the clip led was continuously bouncing red. I saw on the forum that many other people had this problem, so I fixed it in the same way uploading Arduino to Rev D V3.1.
But now the problem is that the transceiver does not transmit! I installed and uninstalled, checked and double checked but the result is that the transceiver does not transmit. :roll:

Because the only thing that has changed are the Windows 10 updates I think that this problem was caused by these updates!
I have a computer Asus with processor Intel i3-2120 CPU 3,30 GHz; 4 GB RAM; 32 bit; Windows 10. My sound card is: StarTech.com as recommended.

Any idea?


Top
 Profile  
 
PostPosted: Fri Aug 17, 2018 3:25 pm 
Offline

Joined: Mon Jul 23, 2012 6:25 am
Posts: 1143
Yes, If you changed the USB port where you plug in the RS-HFIQ, it enumerates as a different COM port. If that happens you need to change the Omni-Rig settings to the new port or the RS-HFIQ will not respond to serial commands.

73,
Jim WA2EUJ


Top
 Profile  
 
PostPosted: Fri Aug 17, 2018 8:23 pm 
Offline

Joined: Thu Oct 26, 2017 1:23 am
Posts: 8
jimveatch wrote:
Yes, If you changed the USB port where you plug in the RS-HFIQ, it enumerates as a different COM port. If that happens you need to change the Omni-Rig settings to the new port or the RS-HFIQ will not respond to serial commands.

73,
Jim WA2EUJ


You are a genius :oops:
I changed the Omni-Rig to the same port of the RS-HFIQ and immediately got the RF power.
Many thanks, I was very sad due to this problem. So tomorrow I will be able to test my home made antenna.
Have a great weekend!
73,
Paolo IU1KFI


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group